• 4 functions from one tap – everyday hot and cold water plus filtered boiling and filtered chilled drinking water
• Filtered hot water on demand – adjustable from 60°C to 98°C
• Filtered chilled water on demand
• Advanced filtration – sediment + carbon + nanomembrane filtration down to 0.01 micron
• One elegant tap – no separate filtered-water tap required
• Space-saving design – boiler and chiller are installed neatly under the sink

What are the four functions of the 4-in-1 tap?
The system provides everyday hot and cold water plus filtered boiling and filtered chilled drinking water

How hot does the boiling-water system get?
The boiler has an adjustable hot-water temperature range from 60°C to 98°C.

Does the system provide chilled water?
Yes. The under-sink chiller has a 1.9L stainless steel tank and a cooling capacity of 8 litres per hour at 10°C ± 2°C.

Does the system filter the drinking water?
Yes. It uses sediment, carbon and nanomembrane filtration, with filtration stated down to 0.01 micron.

How often does the filter need replacing?
The brochure specifies a cartridge capacity of up to 23,000 litres or 1 year.* Actual replacement frequency may depend on water quality and usage.

Does everything fit underneath the sink?
The boiler and chiller are designed for under-sink installation, leaving the single 4-in-1 tap visible above the bench.

What size is the boiler?
The boiler measures 360mm H × 190mm W × 340mm D and weighs approximately 9.1kg.

What size is the chiller?
The chiller measures 290mm H × 210mm W × 410mm D and weighs approximately 12.5kg.

What size hole is required for the tap?
The specified tap drill-hole size is 35mm.

What warranty does the system have?
The brochure specifies a 3-year warranty for both the boiler and chiller.